Info about f400 | OkcarOS Wiki

WARNING: The LG G3 (Korea) is no longer maintained. A build guide is available for developers that would like to make private builds, or even restart official support.

Guides

Installation for yourself
Build for yourself
Update to a newer build of the same OkcarOS version
- Upgrade to a higher version of OkcarOS (e.g. lineage-17.1 -> lineage-18.1)

Special boot modes

Recovery: With the device powered off, hold Volume Down + Power.

NOTE: Accept the factory reset prompt using the hardware buttons. If you have done everything correctly, this will not actually reset your device but instead will boot the custom recovery.
Bootloader/Fastboot/Download: With the device powered off, hold Volume Up and connect the USB cable.

Known quirks

Device integrity

Find help online

You can find assistance with OkcarOS on our subreddit, or in #OkcarOS on Libera.Chat.

NOTE: This page is auto-generated for the LG G3 (Korea), based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Specifications
LG G3 (Korea) (f400)
Released	June 2014
SoC	Qualcomm MSM8974AC Snapdragon 801
RAM	3 GB
CPU	Quad-core Krait 400 2.5 GHz
Architecture	arm
GPU	Qualcomm Adreno 330
Network	2G GSM 3G UMTS
Storage	16/32 GB
SD card	Up to 256 GB
Screen	5.5 in (139.7 mm) 2560x1440 (534 PPI) IPS LCD
Bluetooth	4.0 + LE with A2DP + aptX
Wi-Fi	802.11 a/b/g/n/ac
Peripherals	Accelerometer Compass Gyroscope Infrared sensor Proximity sensor
Cameras	2 13 MP, Dual LED flash 2.1 MP, No flash
Dimensions	146.3 mm (5.76 in) (h) 74.6 mm (2.94 in) (w) 8.9 mm (0.35 in) (d)
Battery	Removable Li-Ion 3000 mAh
OkcarOS info
Previously supported versions	14.1 (Android 7.1) 15.1 (Android 8.1) 16.0 (Android 9) 17.1 (Android 10) 18.1 (Android 11)