返回Update firmware on
alioth
Update firmware on
Xiaomi Mi 11X
alioth
警告: Make sure to download exact firmware for your model. You can discern your model from Settings > About phone > MIUI version (Eg: In MIUI version V13.0.6.0 SKHMIXM ‘MI’ represents your phone region, which is Global). You can also verify your Xiaomi phone at official site.
Tip: Some devices might have buggy USB support while in bootloader mode, if you see
fastboot
hanging with no output when using commands such as fastboot getvar ...
, fastboot flash ...
you may have to try a different USB port (preferably a USB Type-A 2.0 one) or use a USB hub.- Download the required firmware for your model.
- Mi 11X India - V14.0.2.0.TKHINXM
- Extract firmware files from zip using payload-dumper-go
payload-dumper-go -o . miui_*.zip
- Power off the device, and boot it into bootloader mode:
- With the device powered off, hold Volume Down + Power. Keep holding both buttons until the word “FASTBOOT” appears on the screen, then release.
- Run the following commands to flash firmware:
fastboot flash abl_ab abl.img fastboot flash aop_ab aop.img fastboot flash bluetooth_ab bluetooth.img fastboot flash cmnlib_ab cmnlib.img fastboot flash cmnlib64_ab cmnlib64.img fastboot flash devcfg_ab devcfg.img fastboot flash dsp_ab dsp.img fastboot flash featenabler_ab featenabler.img fastboot flash hyp_ab hyp.img fastboot flash imagefv_ab imagefv.img fastboot flash keymaster_ab keymaster.img fastboot flash modem_ab modem.img fastboot flash qupfw_ab qupfw.img fastboot flash tz_ab tz.img fastboot flash uefisecapp_ab uefisecapp.img fastboot flash xbl_ab xbl.img fastboot flash xbl_config_ab xbl_config.img
- Reboot:
fastboot reboot